Products & Technologies

Seek Your Custom Solution

GP® Wood Adhesive Scavengers

Liquid formaldehyde scavengers designed specifically for composite panel production. These products aid in complying with:

  • California Air Resource Board (CARB) Airborne Toxic Control Measure (ATCM) for Composite Panels Phase 2 emission standards
  • Some operations–targeted physical properties defined by ANSI standard A208.1-2009 Tables A and B.
  • ANSI standard A208.1-2009 defined formaldehyde emissions set forth in section 3.4.

Applications

Composite panels, Hardboard, Medium Density Fiberboard (MDF), Particleboard, Wood adhesives

Product Composition

Scavenger solution, Scavenger resins

Appearance/Form

Clear, opaque or amber colored liquid

Certifications

Can help finished products meet CARB Phase 2 and ANSI standards A208.1-2009 section 3.4 and Tables A and B.

Typical Properties
Solids Content, %
40-65
pH @ 25°C
4.5-9.0
Water Dilutability @ 25°C
50:1 minimum
Specific Gravity
1.10-1.32
Storage Temperature, °C
15-30
Shelf Life
Three weeks

Packaging

Tank Truck, Totes

Storage and Handling

Scavenger products should be stored in clean tanks or containers at temperatures up to 30°C (86°F). Keep from freezing. Refer to the Material Safety Data Sheet for information on the safe handling of these products.

The information and technical data herein is believed to be accurate. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and handling of the product. NO WARRANTY, EXPRESS OR IMPLIED, IS MADE INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY EXCLUDED. Nothing contained herein shall be construed as a license to operate under or recommendation to infringe any patents.

bonds that last. advancements that work.™