Products & Technologies

Seek Your Custom Solution

GP® 4003 Resin

GP® 4003 resin is an aqueous dispersion designed as a modifier for latex and phenoxy resins to improve chemical resistance and adhesion for coatings on rigid substrates.


Adhesives & sealants, Coatings, Corrosion inhibitors, Protective coatings, Protective coatings: Drum and pail, Protective coatings: Metal protection, Protective coatings: Pipe

Product Composition

Heat-reactive aqueous-based dispersion



Typical Properties
Viscosity @25°C, cP (mPa*sec)
1500 - 6000
Solids, wt. %
44 - 48
Specific Gravity
1.08 - 1.12
Water; Diethylene glycol monobutyl ether



Storage and Handling

Water-based heat-reactive resins have a limited shelf life. Extended storage at high temperatures should be avoided to prolong the useful life of the resins. It is suggested that the resin be stored in a cool, dry location at temperatures between 45°F to 60°F.

The information and technical data herein is believed to be accurate. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and handling of the product. NO WARRANTY, EXPRESS OR IMPLIED, IS MADE INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY EXCLUDED. Nothing contained herein shall be construed as a license to operate under or recommendation to infringe any patents.

bonds that last. advancements that work.™