Products & Technologies

Seek Your Custom Solution

GP® BKUA-2353 Resin Dispersion

A non-heat-reactive aqueous dispersion for waterborne adhesives, sealants and coatings systems. It provides improved adhesion and green strength development in acrylic latex adhesives. GP BKUA-2353 is stabilized with a non-ionic emulsifier as well as a coupling solvent additive.

Applications

Acrylic latex adhesives, Adhesives & sealants, Automotive Brakes, Coatings

Product Composition

Aqueous dispersion

Appearance/Form

Milky white liquid

Typical Properties
Viscosity @ 25°C, cP (mPa*sec)
2000 - 5000
Solids, wt. %
43 - 47
Specific Gravity @ 25°C
Approximately 1.06 - 1.07
Co-Solvents
Propylene glycol MPE and isopropanol

Storage and Handling

The dispersion is freeze-thaw, shear and storage stable. Extended storage at high temperatures should be avoided to prolong the useful life of the resins. It is suggested that the resin be stored in a cool, dry location at temperatures between 45°F (7°C) and 60°F (16°C). Storage below 45°F is not recommended in order to prevent freezing. This product should be stored and used in areas with good ventilation.

The proper personal protective equipment should be worn whenever GP BKUA-2353 dispersion is used or handled. For safety and health information, please refer to the Safety Data Sheet for GP BKUA-2353 dispersion available from Georgia-Pacific Chemicals.

The information and technical data herein is believed to be accurate. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and handling of the product. NO WARRANTY, EXPRESS OR IMPLIED, IS MADE INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY EXCLUDED. Nothing contained herein shall be construed as a license to operate under or recommendation to infringe any patents.

bonds that last. advancements that work.™