Products & Technologies

Seek Your Custom Solution

GP® BRSD-2112 Resin

A liquid heat-reactive phenolic-based resin solution.

Applications

Adhesives & sealants, Rubber to metal adhesion

Product Composition

Heat-reactive phenolic-based resin solution in ethanol and methyl-ethyl ketone

Appearance/Form

Liquid

Certifications

GP BRSD-2112 coating resin is compliant with FDA 21 CFR Part 175 Indirect Food Additives: Adhesives and Components of Coatings per 175.105 as a component of an adhesive and 175.300 as a resinous and polymeric coating. It complies with 176.170 Indirect Food Additives: Paper and Paperboard Components in contact with aqueous and fatty foods as a component of adhesives and resinous and polymeric coatings. It also complies with 176.180 Indirect Food Additives: Paper and Paperboard Components in contact with dry foods as a component of adhesives and resinous and polymeric coatings and 177.1210 as a component in closures with sealing gaskets for food containers.

Typical Properties
Viscosity @ 25°C, cP (mPa*sec)
40 -100
Solids, wt. %
57 - 63

Packaging

Typically shipped in drums.

Storage and Handling

GP BRSD-2112 resin is heat-reactive with a limited shelf life. Extended storage at high temperatures should be avoided to prolong the useful life of the resins. It is suggested that the resin be stored at or below 50°F (10°C) or below in order to extend storage life. Storage in sunlight should be avoided. Storage life is dependent on your product’s formulation using GP BRSD-2112 resin. This product should be stored and used in areas with good ventilation.

The proper personal protective equipment should be worn whenever GP BRSD-2112 resin is used or handled. For safety and health information, please refer to the Safety Data Sheet for GP BRSD-2112 resin available from Georgia-Pacific Chemicals.

The information and technical data herein is believed to be accurate. It is offered for your consideration, investigation and verification. Buyer assumes all risk of use, storage and handling of the product. NO WARRANTY, EXPRESS OR IMPLIED, IS MADE INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY EXCLUDED. Nothing contained herein shall be construed as a license to operate under or recommendation to infringe any patents.

bonds that last. advancements that work.™